In order to develop and maintain long-term performance due to the bearing fully, must to do regular maintenance (check).

Through the appropriate regular inspection for bearing, do early detection of fault, prevent accident in the bud,it is very important to improve the productivity and economy..

Cleaning

When the bearing is removed, Use the camera with a appearance record first. In addition, to confirm the amount of residual lubricant and take lubricant sampling, and then clean the bearing.

1. Bearing cleaning divide into gross rinse and perfect rinse, and placed the metal grid at the bottom of the container.

2.       To remove grease or adhesive with a brush etc. in oil when gross rinse. At this time, if the bearings in oil rotation, please pay attention to it will be due to foreign bodies and other damage to the rolling surface.

3.       The bearings should be slowly rotating when perfect rinse,and must be have a carefully process.

Cleaning agents are commonly used as neutral no water diesel or kerosene, sometimes using warm lye as needed, No matter what kinds of cleaning agents use, all of them are often filtered clean.

After cleaning, the bearing must be coated with rust proof oil or rust proof grease Immediately.